Uniden UDRC13 English Owner's Manual - Page 5
Pair Camera To Monitor, Mount The Camera
View all Uniden UDRC13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Item What it is 9 Microphone: Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. 10 POWER: Turns the camera ON or OFF. 11 Charging LED: Red = Charging Green = Fully charged Off = Camera and power adapter are disconnected or power adapter is disconnected from power source. 12 Power LED: Green = Camera is turned on. Green (Blinking) = Battery is low. 13 DC 5V Power: Connects the DC 5V power adaptor to the camera. 14 Reset the camera. Use a blunt object like an unbent paper clip to press Reset and reset the camera. The camera turns off. Press POWER to turn it back on again. PAIR CAMERA TO Monitor Refer to the UDR444 Wireless Video Surveillance System Owner's Manual for pairing and other operation instructions. Mount the Camera Wall Mount The UDRC13 clip has two slots that fit over screws to mount the unit on the wall. 1. Mark the position of the screw holes on the wall. 2. Drill holes and insert the anchors and screws provided. Be sure to leave room for the stand to fit over the screw heads. 3. Place the stand over the installed screws and push it downwards, locking it into place. WALL