Uniden UDRC13 English Owner's Manual - Page 6

Suction Mount, Clip-Mount, Connect Power

Get Uniden UDRC13 PDF manuals and user guides View all Uniden UDRC13 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

4. Adjust the camera as needed. Suction Mount 1. Insert the suction base into the base clip as shown: 2. Firmly press the camera with the suction base attached onto glass or metallic surfaces. 3. Adjust the camera as needed. Clip-Mount Clip the UDRC13 on ledges and shelves. 1. Press the mounting clip as shown. 2. Place the unit over the mounting surface and release. 3. Adjust the camera as needed. Connect Power 1. Insert the AC adapter power plug into the camera's DC adaptor input jack. 2. Plug the other end into a 120 volt AC (standard indoor) power outlet or surge protector. 3. Press Power and make sure the green power LED turns on. If it doesn't, try reconnecting the AC adapter, making sure the power outlet isn't controlled by a wall switch.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
4. Adjust the camera as needed.
Suction Mount
1. Insert the suction base into the base clip as
shown:
2. Firmly press the camera with the suction base
attached onto glass or metallic surfaces.
3. Adjust the camera as needed.
Clip-Mount
Clip the UDRC13 on ledges and shelves.
1.
Press the mounting clip as shown.
2.
Place the unit over the mounting surface and
release.
3. Adjust the camera as needed.
Connect Power
1. Insert the AC adapter power plug into the
camera’s DC adaptor input jack.
2.
Plug the other end into a 120 volt AC (standard
indoor) power outlet or surge protector.
3.
Press
POWER
and make sure the green power
LED
turns on. If it doesn’t, try reconnecting the
AC adapter, making sure the power outlet isn’t
controlled by a wall switch.