Uniden UDW20055 English Owners Manual - Page 21

Resetting Your System Resetting the camera or receiver will erase any changes and set all values back to the default. You should only reset your system under the following conditions: Resetting the camera - You are unable to pair the camera to the receiver. - The image on the screen is frozen. Resetting the receiver - The buttons on the receiver are not responding. - The image on the screen is frozen, and resetting the camera did not help. To reset the camera or receiver, unplug the AC adapter. Wait at least 15 seconds, then reconnect the AC adapter. Additional Information Product Specifications Radio Frequency Transceiver RF Frequency Modulation Spread spectrum Anti Interference Selectable camera channel Data rate Channel bandwidth Transmitting range 2402 Mhz ~ 2483.5 Mhz GFSK Frequency Hopping Clean Channel Dynamic Select 4 2 Mbps 2 MHz 200 meters/600 feet in an open area (line of sight) 21