Uniden UDW20055 English Owners Manual - Page 7
Switch the bracket, Mount the stand, where you want to mount it, - security camera
UPC - 050633405017
View all Uniden UDW20055 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Switch the bracket If you want to mount the camera in a hanging position, you'll need to flip the bracket to the top of the camera: 1. Loosen the bolts on the side of the mounting bracket. 2. Carefully slide the bracket off of the camera and sun shield. 3. Rotate the bracket 180° and slide it back onto the camera. 4. If necessary, adjust the camera angle, then tighten the bolts. 2 Flip the bracket upside down and slide it back onto the camera. 3 Adjust the camera to the desired angle and tighten the bolts. 1 Loosen the bolts and slide the mounting bracket off of the camera. Mount the stand 1. Hold the base of the camera stand where you want to mount it, and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. 3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.