Uniden UDWC23 English Owners Manual - Page 6

Mounting Camera screw brace Mounting post Post lock Screw holes 1. Hold the base of the mount where you want to attach it, and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. 3. Attach the camera to the mounting screw. Tighten it a few turns, then turn it to the direction you want. 4. Tighten the camera brace up against the back of the camera to secure it into place. 5. Unlock the mounting post by turning the wingnut to the left a few turns. . Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place. 2 Tighten the brace against the camera to secure it in place. 1 Attach the camera to the mounting screw and turn it to the desired direction. 3 Loosen the wingnut to unlock the mounting post. 4 Adjust the post to the correct angle, then tighten the wingnut to lock the post into place.