Uniden UDWC23 English Owners Manual - Page 7

Pairing the Camera Before you can use the camera, you'll need to "introduce" or pair it to the receiver so they can communicate. You might also perform the pairing procedure if you are having trouble with the camera. 1. Make sure the camera is powered on. 2. On the receiver, select the channel you want to pair this camera to, and put the receiver into pairing mode. (This process is slightly different on each receiver. See the manual that came with your receiver for instructions.) 3. On the camera, press Link to put the camera into pairing mode. 4. Switch the receiver to this camera's channel, and verify that the camera's video signal appears on the correct channel. (You might have to enable the new channel first.) For more information about pairing a camera to your receiver, see the manual that came with your receiver. If... Try... the receiver's signal status icon shows no bars or the display says No Signal - making sure the camera is turned on - making sure the camera is paired to the correct channel - re-pairing the camera and receiver the signal status icon shows one or two bars or the video quality is poor see the manual that came with your receiver for tips on improving video quality there is a lot of static on the see the manual that came with your receiver receiver for tips on improving video quality