Uniden UDWC25 English Owners Manual - Page 5

Using the Camera Stand - receiver

Page 5 highlights

What the lights mean Light State What it means Power status On The camera is on. Off The camera is off. Link status Flashing Orange Off The camera is in pairing mode. The camera is connected to the receiver. The camera is in standby. Mounting Camera screw brace Using the Camera Stand You can mount the camera with the stand on the bottom (on a wall or table-top) or on the top (on the ceiling). When you are positioning the camera, you might want to bring the receiver along; it's much easier to get the camera into the right position when you have the display handy. Mounting post Post lock Switch the bracket If you want to mount the camera in a hanging position, you'll need to flip the bracket to the top of the camera: 1. Loosen the bolts on the side of the mounting bracket. Screw holes 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

5
What the lights mean
Light
State
What it means
Power
status
On
The camera is on.
Off
The camera is off.
Link
status
Flashing
The camera is in pairing mode.
Orange
The camera is connected to the receiver.
Off
The camera is in standby.
Using the Camera Stand
You can mount the camera with the stand
on the bottom (on a wall or table-top) or on
the top (on the ceiling). When you are
positioning the camera, you might want to
bring the receiver along; it’s much easier to
get the camera into the right position when
you have the display handy.
Switch the bracket
If you want to mount the camera in a hanging
position, you’ll need to flip the bracket to the
top of the camera:
Loosen the bolts on the side of the
mounting bracket.
1.
Camera
brace
Mounting
screw
Mounting
post
Post
lock
Screw
holes
Camera
brace
Mounting
screw
Mounting
post
Post
lock
Screw
holes