Uniden UDWC25 English Owners Manual - Page 6
Mount the stand - security camera
 |
UPC - 050633405024
View all Uniden UDWC25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Carefully slide the bracket off of the camera and sun shield. 2 Flip the bracket upside down and slide it back onto the camera. 3. Rotate the bracket 180° and slide it back onto the camera. 4. If necessary, adjust the camera angle, then tighten the bolts. 3 Adjust the camera to the desired angle and tighten the bolts. 1 Loosen the bolts and slide the mounting bracket off of the camera. Mount the stand 1. Hold the base of the camera stand where you want to mount it, and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. 3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
6
Carefully slide the
bracket off of
the camera and
sun shield.
Rotate the
bracket 180°
and slide it
back onto the
camera.
If necessary,
adjust the
camera angle,
then tighten the
bolts.
Mount the stand
Hold the base of the camera stand where you want
to mount it, and mark the location of the screw
holes.
Use the included screws
and anchors to attach
the base to the wall or
ceiling.
Before attaching the
camera, tug gently on
the stand to make sure it
is securely in place.
2.
3.
4.
1.
2.
3.
1
2
3
Loosen the bolts
and slide the mounting
bracket off of the camera.
Flip the bracket upside
down and slide it back
onto the camera.
Adjust the camera to
the desired angle
and tighten the bolts.
1
2
3
Loosen the bolts
and slide the mounting
bracket off of the camera.
Flip the bracket upside
down and slide it back
onto the camera.
Adjust the camera to
the desired angle
and tighten the bolts.