Uniden UIP200 English Owners Manual - Page 19

UIP200 User's Manual Page 19 of 27 Transferring a Call The steps below represent the most common method of transferring a call. Please note that the transfer operation may work differently with different systems. Step 1: During a call, press the XFR/FLASH key. This puts the current call on hold, and you will hear a dial tone. Step 2: Dial the number you wish to transfer the call to; you can transfer a call to any number, even one outside of your network. Step 3: If you do not want to wait for the other party to answer (a blind transfer), hang up the phone. Step 4: If you wait for the other party to answer, you can speak with the other party before hanging up the phone and transferring the call. Call Waiting Operation Step 1: If the call-waiting feature is enabled, you will hear a call waiting tone when another call comes in while you are on the line. Step 2: Press the XFR/FLASH key. This puts the current call on hold and allows you to speak with the new caller. Step 3: You can switch between the calls by pressing the XFR/FLASH key. ! NOTE: If you disconnect one party, you will hear a fast ring, indicating there is another call waiting. You can reconnect by going off-hook again. Hold During a conversation, you can put the other party on hold by pressing the HOLD key. The HOLD key will blink continuously, and the LCD will display the duration timer and phone number of the party on hold. After 360 seconds (six minutes), an alert tone will sound to let you know the caller has been holding for a long time. To return to the call, press the HOLD key again. Rev. 1.0, © UAC, May, 2004