Uniden UIP200 English Owners Manual - Page 20

UIP200 User's Manual Page 20 of 27 Feature Operations Programmable and Fixed Function Keys There are eight programmable function keys and eight fixed functions keys in the UIP200. Programmable function keys can be assigned to any one of the available functions: One-touch speed dial, Two-touch speed dial, DND, Voice Message Access (VMA) or Mute. The programmable keys also act as LEDs to indicate the status of the assigned function. Table 4 Fixed-Function Key and Programmable Key Defaults Key Programmable key 1-4 Programmable key 5 Programmable key 6 Programmable key 7 Programmable key 8 Operation One-Touch Dialing Two-Touch Dialing Do Not Disturb Voice Message Access Mute (microphone) 1-Touch Dialing Programmable Keys 1 through 4 come pre-programmed with 1-Touch dialing feature. To use the 1-Touch dialing feature, you must program a phone number to one of the 1-touch programmable keys (see Programming a 1-Touch Number on page 23). (1-Touch dialing keys do not illuminate to indicate their state). 1-Touch Dialing-Off-Hook Operation Step 1: Pick up the cradle or press the HEADSET/SPEAKER key. Step 2: Select the appropriate 1-TOUCH key. If you programmed the DIAL key as part of the number, the phone will start connecting immediately; otherwise, connection will start the after approximately 4 seconds. 1-Touch Dialing-On-Hook Operation Step 1: Press the desired 1-TOUCH key. Step 2: Pick up the cradle or press the HEADSET/SPEAKER key. If you programmed the DIAL key as part of the number, the phone will start connecting immediately; otherwise, connection will start the after approximately 4 seconds. Rev. 1.0, © UAC, May, 2004