Uniden WIN1200 English Owners Manual - Page 15
Connecting the Base and Charging the Handset, only the Uniden AD-0006 AC adapter.
UPC - 050633402115
View all Uniden WIN1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Base and Charging the Handset CAUTION: To avoid risk of fire and shock, use only the Uniden AD-0006 AC adapter. NOTE: Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. 1. Connect the AC adapter to the yellow power connector (labeled DC IN 9V). A) Place the AC adapter behind the adapter channel guide and line it up with the yellow power connector. B) Push the adapter into the connector. C) Turn the adapter towards the rear of the base so the adapter head fits in the AC adapter channel. 2. Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. 3. Place the handset in the base with the LCD screen facing forward. 4. Make sure that the charge Light comes on. If the LED does not come on, make sure the AC adapter is plugged in and the handset makes good contact with the charging contacts. 5. Charge your handset at least 15 hours before plugging into the phone line. NOTE: For optimum battery life, make sure the handset is fully charged before plugging in the phone line. 14