Uniden WX500 English Owners Manual - Page 29

Technical Specifications

Page 29 highlights

TECHNICAL SPECIFICATIONS Frequency Coverage (MHz): Channel 1: 162.550 Channel 2: 162.400 Channel 3: 162.475 Channel 4: 162.425 Channel 5: 162.450 Channel 6: 162.500 Channel 7: 162.525 Receiving Sensitivity (at 12 dB SINAD): 0.35 mV FIPS Decode Sensitivity @ Dev. ±4.5 kHz Deviation/90 % Success Rate: 0.40 mV Signal & Noise Ratio: 40 dB Channel Selectivity: 45 dB Audio Output Power @ 10% THD: 250 mW Power Requirements: Use AC500 (adaptor included) with 120 V AC (±10%) 60 Hz or DC cigarette lighter adaptor Battery Back-up: One 9-Volt Alkaline Battery (not included) Antenna: Telescopic Rod Antenna (built-in) Dimensions: 127 (W) x 126 (D) x 48 (H) mm Weight: 245 g without AC ADAPTOR and 9 V Battery Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

26
Frequency Coverage (MHz):
Channel 1:
162.550
Channel 2:
162.400
Channel 3:
162.475
Channel 4:
162.425
Channel 5:
162.450
Channel 6:
162.500
Channel 7:
162.525
Receiving Sensitivity
(at 12 dB SINAD):
0.35
m
V
FIPS Decode Sensitivity @ Dev. –4.5 kHz
Deviation/90 % Success Rate:
0.40
m
V
Signal & Noise Ratio:
40 dB
Channel Selectivity:
45 dB
Audio Output Power @ 10% THD:
250 mW
Power Requirements:
Use AC500 (adaptor included)
with 120 V AC (–10%) 60 Hz
or DC cigarette lighter adaptor
Battery Back-up:
One 9-Volt Alkaline Battery
(not included)
Antenna:
Telescopic Rod Antenna
(built-in)
Dimensions:
127 (W) x 126 (D) x 48 (H) mm
Weight:
245 g without AC ADAPTOR
and 9 V Battery
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement without notice.
TECHNICAL SPECIFICATIONS