Via EPIA-EN12000EG User Manual - Page 20
DDR SDRAM Module Installation Procedures, Available DDR SDRAM Configurations - epia memory
UPC - 825529003567
View all Via EPIA-EN12000EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 MEMORY MODULE INSTALLATION The VIA EPIA-EN Mini-ITX mainboard provides one 240-pin DIMM slot for DDR2 533/400 SDRAM memory modules and supports the memory size up to 1GB. DIMM DDR SDRAM Module Installation Procedures • Locate the DIMM slot in the motherboard. • Unlock a DIMM slot by pressing the retaining clips outward. • Align a DIMM on the socket such that the notch on the DIMM matches the break on the slot. • Firmly insert the DIMM into the slot until the retaining clips snap back in place and the DIMM is properly seated. Available DDR SDRAM Configurations Refer to the table below for available DDR SDRAM configurations on the mainboard. Slot Module Size DIMM 64MB, 128MB, 256MB, 512MB, 1GB Maximum supported system memory Total 64MB-1GB 64MB-1GB 12