Vaddio PowerVIEW HD-22 User Guide - Page 6

PowerVIEW HD-22 and HD-30 Rear Panel Connections with Feature Call-outs Image: PowerVIEW HD-20 or HD-30 HD PTZ Camera ⑤ ⑨ ⑥ ⑩ ⑦ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out (Color Coded Blue): The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate and image flip can be configured on these switches. See the Switch Settings page for additional information. 7) HD Video Select: A rotary switch allows the user to choose the component HD output video resolution and format. See the Switch Settings page for additional information.  HD Resolution Note: When changing the resolution of the camera, the camera should be power-cycled after the change. Most switchers will also have to be reset or rebooted as well. 8) 12 VDC Input: Power input for the standard, PowerVIEW HD-22 and HD-30 camera power supply. 9) HDMI Output: The HDMI output feeds out HD digital video only (no copy protect or device communication is included). The HDMI output is optimized for HD video signals (seems logical). 10) YPbPr Output: Component HD video (YPbPr) is output through the DE-15 connector. YPbPr and HDMI signals are simultaneous. Limited SD resolutions are supported. 11) EZ-POWER VIDEO Port (Color Coded Orange): This RJ-45 connector is only used with the Quick-Connect SR Interface, Quick-Connect DVI-D/HDMI SR Interface and the Quick-Connect USB Interface to supply power and return HSDS (differential) video from the camera. 12) Slot for Optional Cards: The EZIM CCU slot card for the CCU can be plugged into the PowerVIEW HD-22 HD camera. PowerVIEW HD-22 and HD-30 HD PTZ Cameras Document Number 342-0626 Rev D Page 6 of 16