Vaddio ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV Manual - Page 13

ProductionVIEW HD-SDI MV Operating the ProductionVIEW HD-SDI MV: Most of the console functions and controls are easy and intuitive. Over the next few pages there are details on how the different functions operate. Camera Controls: The controls that can be used to adjust a PTZ camera are highlighted in the diagram to the right (mechanical functions are in gray, and electronic in blue). See notes below for additional information. ProductionVIEW HD-SDI MV is shipped with "Select Follow Preview" as the default setting. In this configuration, the camera that is selected on the Preview bus will automatically choose the appropriate Camera Select button in the upper right corner. In this example, Input 1 is a PTZ camera on the Preview bus and the Camera Select is illuminated on Input 1 ("1" with a circle around the number). CONTROL MODE CONTROL MENUS FOCUS AUTO FOCUS AWB STATUS LINE ProductionVIEW HD-SDI MV CAMERA SELECT MENU CAMERA PRESETS IRIS AUTO IRIS BLC LOWER SCREEN GRAPHIC TRANSPARENCY LEVEL P. I. P. POSITIONING LOWER SCREEN SIZE WIPE PATTERNS PROGRAM TRANSITION .01 4 SEC SPEED 1 2 3 4 5 6 LSG PIP PREVIEW MIX / FTB CUT WIPE PAN - + SPEED TILT - + SPEED ZOOM - + SPEED 1 2 3 4 5 6 LSG PIP TAKE 3-Axis Hall Effect Joystick: Within the menus, the 3-axis joystick is programmable for pan, tilt and zoom direction control. The zoom-in/zoom-out, tilt-up/tilt-down and pan-left/pan-right commands can be inverted on all 3-axis to customize control of the PTZ cameras attached to ProductionVIEW HD-SDI MV. Pan, tilt and zoom speeds can be adjusted on controls above the joystick. The PTZ speeds are set on a per camera basis. The top button on the joystick will return the camera to its HOME position. Preset Location Storage Options: This feature allows the user to store 12 camera presets in the ProductionVIEW HD-SDI MV or have the option of storing 6 camera presets (1 through 6) in the camera and 6 presets (7 through 12) in the ProductionVIEW HD MV. When storing the presets in the camera, the user is allowed to speed switch camera presets. Please see the ProductionVIEW HD-SDI MV Menu Structure, System Menu for access to the Preset location parameter. Setting the Camera Presets: To program a PTZ camera preset, press and hold the Camera Select button for three (3) seconds. The Camera Preset button (1 thru 12) will begin to flash. Move the camera to the desired PTZ position, and select one of the Camera Presets buttons to store the position. Repeat the process for each preset position that is required to be stored, up to 12 total positions per PTZ camera. A non-flashing preset button has a location stored, but can be overwritten. Select Follows Preview: When "Select Follows Preview" is activated, the camera selected for control is the camera selected by the Preview bus selection. The operator selects the camera to be previewed, and control (joystick and camera control) is transferred to that camera. The default position for this feature from the factory is 'on'. Note: Select Follows Preview is disabled when the system is set for Dual Bus mode. Focus, Iris, Auto White Balance and Backlight Compensation: When the Auto Focus or Auto Iris buttons are turned off, the manual focus and iris knobs can be used to adjust these functions on compatible PTZ cameras that are connected to the system. Auto White Balance (AWB) automatically adjusts the camera's color settings based on lighting and other factors. Backlight Compensation (BLC) opens the iris to allow objects in front of windows and other bright backgrounds to be more visible. NOTES: 1) Local Camera Presets (Local Mode): Local Mode contains all the camera information that has been set and saved in the ProductionVIEW HD-SDI MV: Pan/Tilt/Zoom position including brightness, focus, backlight, zoom speed etc. There are 12 Local Presets available for each camera in this mode. In Camera Presets (6 InCam 6 Local Mode): The 6-In Camera Presets are saved in the camera memory if applicable. Not all cameras can store internal presets in this mode. These presets are limited primarily to the Pan/Tilt/Zoom position. The 6-Local Camera Presets include the ProductionVIEW HD-SDI MV settings. 2) The particular control saved under each camera preset is a function of the parameters available on the camera only. 3) Camera presets will not save specific settings of a Quick-Connect CCU. 4) Backlight Compensation can only be used when the Auto White Balance is turned on. 5) Auto White Balance will not operate with the Panasonic AW-HE100, as well as the WallVIEW HE100 cameras. ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 13 of 36