Vaddio ProductionVIEW HD-SDI MV ProductionVIEW HD-SDI MV Manual - Page 29
Camera Control Ports 1 through 6 - RS-232 on RJ-45 Connectors
View all Vaddio ProductionVIEW HD-SDI MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
ProductionVIEW HD-SDI MV Appendix 1: Video and Control Pin-out Table for ProductionVIEW HD-SDI MV Camera Control Ports 1 through 6 - RS-232 on RJ-45 Connectors: PIN# 1) 2) 3) 4) 5) 6) 7) 8) Signal Unused Unused Unused Unused Unused GND TXD (to RXD of camera) RXD (from TXD of camera) 12345678 Appendix 2: RS-232 Control The ProductionVIEW HD-SDI MV has six (6) discrete camera control ports which eliminates the need for daisychaining control cabling. With ProductionVIEW HD-SDI MV, all cabling configurations are home run wiring configurations. Each Channel will auto-configure the input channel for control of the camera attached. Vaddio uses simple control protocols to accomplish custom programming with the ProductionVIEW HD-SDI MV. The Communication Specification, API and Programming Language are listed below and definitions are listed on the next page. Note: All commands must be followed by a carriage return. Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control Control Port - RS-232 on DB-9F Connector PIN# Signal 2) TXD 3) RXD 5) GND All other pins - Unused ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 29 of 36