Vantec UGT-S110 User Guide - Page 3
Hardware Installation, Software Installation - driver
View all Vantec UGT-S110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
z Installation Guide x 1 z Driver CD x 1 * User's Manual Is on Driver CD Note: Contents may vary depending on the market/country. Hardware Installation 1. Turn off the computer, Unplug the power cord. 2. Open the computer case. Check with your computer manufacturer if you need additional instructions. Remove any old third-party sound cards or the metal PCIe slot bracket. 3. Insert the sound card into a blank PCIe slot. Make sure that all of its pins are touching the PCIe slot's contacts. 4. Check the sound card is inserted into the PCIe slot firmly, and secure it with a screw. 5. Close the case. Plug in the power cord and other cables. 6. Connect the Mini-DIN to 3.5mm fan-out cable bundled in this package and use for 8-channel line output jack. Software Installation For Windows® 2000/ XP/2003/Vista/7 (32/64 bit) UGT‐S110 Page 3