ViewSonic LS500WH - 3000 LED Lumens WXGA LED Projector w/ 125% Rec. 709 User G - Page 71
Light Source Information, Light Source Mode, Description
View all ViewSonic LS500WH - 3000 LED Lumens WXGA LED Projector w/ 125% Rec. 709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Light Source Information This section will provided a better understanding of your projector's light source. Light Source Hour When the projector is being used, the duration (in hours) of light source usage is automatically calculated by the built-in timer. To obtain the light source hour information: 1. Press Menu to open the OSD Menu and go to: Advanced > Light Source Settings > Light Source Hours Information. 2. Press Enter and the Light Source Hours Information page will appear. 3. Press Exit to leave the menu. Extending Light Source Life To prolong light source life, you can adjust the following settings in the OSD Menu. Setting Light Source Mode Setting the projector in any mode other than Normal reduces system noise, power consumption, and extends the light sources operational life. Light Source Mode Description Normal Provides full light source brightness. Eco Reduces light source power consumption by 20% and lowers brightness, and decreases fan noise. Dynamic Black 1 Reduces light source power consumption by up to 70% depending on the content's brightness level. Dynamic Black 2 Reduces light source power consumption by up to 50% depending on the content's brightness level. To set the Light Source Mode, open the OSD Menu and go to: Advanced > Light Source Settings > Light Source Mode and press / to select and press Enter. Setting Auto Power Off This allows the projector to turn off automatically after a set period of time once no input source is detected. Open the OSD Menu and go to: POWER MANAGEMENT > Smart Energy > Auto Power Off and press / to disable or adjust the time. 71