ViewSonic LS810 LS810 User Guide English - Page 41
Setting the Presentation Timer
View all ViewSonic LS810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting the Presentation Timer The presentation timer can indicate the presentation time on-screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Use the remote control and enter Presentation Timer menu or enter Basic > Presentation Timer menu. 2. Press [Enter] to show the Presentation Timer page. 3. Select Timer Interval and press / to confirm the duration. Duration can be set to 1 to 5 minutes, with 1 minute increments, or 5 to 240 minutes in 5 minute increments. Once the timer has been activated, resetting the timer interval will re-activate the timer. 4. Press and select the Timer Display. Then press / to select whether to display or hide the on-screen timer. Selection Always 1 min/2 min/3 min Never Description Displays the timer on screen throughout the presentation time. Display timer on-screen in the last 1 / 2 / 3 minutes. Hides the timer throughout the presentation time. 5. Press and select Timer Position, and then press / to set timer location. Upper left Lower left Upper right Lower right 6. Press to select Timer Counting Direction, then press / to select the required timer method. Selection Count Up Count Down Description Increases from 0 to the preset time. Decrease from the preset time to 0. 7. To activate Presentation Timer, press , then press / and select Begin Countdown, then press [Enter]. 8. A confirmation message will be displayed next. Select Yes and press [Enter] to confirm the selection. The screen will display the message [Timer is On!]. Once activated, the timer will start its countdown. To cancel the timer, perform the following steps: 1. Enter Basic > Presentation Timer menu. 2. Select OFF. Press [Enter]. A confirmation message will be displayed afterwards. 3. Select Yes and press [Enter] to confirm the selection. The screen will display the message [Timer is Off!]. 34