ViewSonic ND4200-LS ND4200-LS User Guide - Page 16
Browser Configuration, Macromedia Flash Transparency Source
View all ViewSonic ND4200-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 In the DHCP field of the Network Configuration screen, tap the down arrow for the pull-down menu and select Enabled to dynamically get network parameters. Make sure there are values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to these fields automatically. If you select Disabled, type valid network parameters in these fields. 4 If any changes were made to this screen, do the following: • To enable the changes, click Apply • To save the changes, click the Administration menu > click Save Configuration > click Save. Browser Configuration The Browser Configuration screen allows you to make specific screen settings for a specific URL that you chose. Click Management > Browser. The screen shown below appears. Note: 1 millisecond = 1/1000th second. 1 In the Macromedia Flash Transparency Source field, select one of the options from the pull-down menu. 2 In the Screen rotation angle (clockwise) field, select one from the pulldown menu for the angle of rotation of the HTML content displayed on-screen. This feature is useful when the NMP-500 is installed vertically. 3 In the Browser Proxy field, select Enabled or Disabled from the pull-down menu. ViewSonic ND4200/ND5000 12