ViewSonic ND4200-LS ND4200-LS User Guide - Page 20
TAS Configuration, Management, Timeout sec, NMP-500s, IP Address, Apply, Administration
View all ViewSonic ND4200-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
TAS Configuration This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The screen shown below appears. 1 In the Timeout (sec) field, type the number of seconds for the NMP-500s to access TAS. 2 In the IP Address field is a valid DNS name automatically generated by TAS when connected to a network but empty when used as a standalone. 3 If any changes were made to this screen, do the following: • To enable the changes, click Apply • To save the changes, click the Administration menu > click Save Configuration > click Save. ViewSonic ND4200/ND5000 16
ViewSonic ND4200/ND5000
16
TAS Configuration
This screen works in conjunction with
TAS
. (TAS software can be purchased through
Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click
Management
>
TAS
. The screen shown below appears.
1
In the
Timeout (sec)
field, type the number of seconds for the
NMP-500s
to
access TAS.
2
In the
IP Address
field is a valid DNS name automatically generated by TAS
when connected to a network but empty when used as a standalone.
3
If any changes were made to this screen, do the following:
•
To enable the changes, click
Apply
•
To save the changes, click the
Administration
menu > click
Save
Configuration
> click
Save
.