ViewSonic PA503W PA503S User Guide English - Page 45

Splash Screen, 3D Settings

Get ViewSonic PA503W PDF manuals and user guides View all ViewSonic PA503W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

4. BASIC menu Function Description Audio Settings See "Adjusting the sound" on page 31 for details. Presentation Timer See "Setting the presentation timer" on page 28 for details. Pattern Blank Timer The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. See "Hiding the image" on page 29 for details. Message Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. Splash Screen Allows you to select which logo screen will be displayed during projector start-up. 3D Settings HDMI Settings Lamp Settings Filter Settings DCR See "Depending on the connected device, the CEC function may not work." on page 30 for details. See "Changing HDMI input settings" on page 21 for details. Lamp Mode See "Setting Lamp Mode" on page 45 for details. Reset Lamp Hours Resets the lamp timer after new lamp is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 45 for details on how the total lamp hour is calculated. See "Using the dust filter (optional accessory)" on page 43 for details. Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode according to the input image detected. This function is only available when a PC input signal is selected. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. 5. ADVANCED menu 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
40
Function
Description
Audio Settings
See
"Adjusting the sound" on page 31
for details.
Presentation
Timer
See
"Setting the presentation timer" on page 28
for details.
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Blank Timer
See
"Hiding the image" on page 29
for details.
Message
Selecting
On
displays the current information on the screen
when the projector is detecting or searching for a signal.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up.
3D Settings
See
"Depending on the connected device, the CEC function
may not work." on page 30
for details.
HDMI Settings
See
"Changing HDMI input settings" on page 21
for details.
Lamp Settings
Lamp Mode
See
"Setting Lamp Mode" on page 45
for details.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For
changing the lamp, please contact qualified service personnel.
Lamp Hours
See
"Getting to know the lamp hour" on page 45
for details on
how the total lamp hour is calculated.
Filter Settings
See
"Using the dust filter (optional accessory)" on page 43
for
details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting
On
enables the function and the projector
will automatically switch the lamp mode according to the
input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during
operation.
4. BASIC menu
5. ADVANCED menu