ViewSonic PPCV37 User Guide - Page 10
IMPORTANT: Keep the battery switch set to ON down position unless, you need to restore factory
UPC - 766907907315
View all ViewSonic PPCV37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
The switch on the back of your Pocket PC V37 should be switched to the ON (down) position. If this is not the case, please set it to ON. Make sure that the V37 is turned off. Unscrew the cap at the top of the stylus. Use the pointed tip of the cap to slide the battery switch to the ON (down) position. The Notification indicator will flash red for approximately 30 seconds, and then your V37 will automatically turn on and display the Welcome Wizard screen. IMPORTANT: Keep the battery switch set to ON (down position) unless you need to restore factory defaults. Connect your V37 to an AC power source. Plug the V37 into the USB cradle. NOTE: You can also connect the V37 directly to the AC adapter without using the USB cradle. For more information see "Battery Charging Options" in this chapter. Plug the appropriate end of the AC adapter into the power connector on the USB cable. NOTE: For information about battery replacement, see page 82.