ViewSonic PPCV37 User Guide - Page 76
²å²²
UPC - 766907907315
View all ViewSonic PPCV37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
This chapter explains how to connect your V37 to the Internet or to a network using a wireless connection. In addition, the chapter explains how to connect to other mobile devices or your PC using an infrared (IR) connection. You can connect to a wireless network at work or at home by installing an SDIO 802.11B (WiFi) network card (purchased separately) into the V37's SDIO slot. Once connected to a network, you can send and receive email messages using Inbox and/or access web pages on the Internet using Pocket Internet Explorer. See Creating a Wireless Connection to a Network below for information about using a wireless connection. You first need to install an 802.11B (WiFi) SDIO network card (purchased separately). For instructions on inserting and using the SDIO WiFi or network card, see the owner's manual for the card. NOTE: Make sure your SDIO card is compatible with SDIO Now! technology, developed by bSquare Inc. If applicable, obtain the following information from your network administrator: user name, password, and domain name. You do not need to create a new connection on your V37. The first time you install the SDIO network card, Network Settings appears automatically so you can configure the network card. Most networks use DHCP, so you should not have to change settings unless your network administrator instructs you to do so. If you need to change settings, do the following: Tap OK. If it does not appear to change settings later, tap and tap Settings. On the Connections tab, tap Network Adapters, tap the adapter you want to change, and tap Properties. Tap , tap Settings, and tap the Connections tab. From My network card connects to list, tap Work, and tap OK.