ViewSonic PS600X - 3700 Lumens XGA Networkable Short Throw Projector User Guid - Page 15
Remote control code, PgUp Up/PgDn Down
View all ViewSonic PS600X - 3700 Lumens XGA Networkable Short Throw Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
• • (Presentation Timer) Displays the Corner Adj. page. Displays the presentation timer settings • Left/ Right/ Up/ Down menu. Selects the desired menu items and makes • Eco Mode adjustments. Displays the lamp mode selection bar. • Menu • (Volume Up) Turns on the On-Screen Display (OSD) Increases the volume level. menu. • Exit Exits and saves menu settings. • (Volume Down) Decreases the volume level. • (Laser) Emits visible laser pointer light for presentation purposes. • (Mute) Toggles the projector audio between on and off. • Aspect Displays the aspect ratio selection bar. • (Information) Displays the INFORMATION menu. • Freeze Freezes the screen picture. • (Zoom In) Magnifies the projected picture size. • Pattern Displays embedded test pattern. • (Zoom Out) Reduces the projected picture size. • Blank Hides the screen picture. • Color Mode Displays the color mode selection bar. • PgUp (Page Up)/PgDn (Page Down) Operates your display software program • (on a connected PC or USB reader) which responds to page up/down commands (like Network Displays the LAN Control Settings menu. Microsoft PowerPoint). Only available when a PC input or USB Reader signal is selected. Remote control code The projector can be assigned to 8 different remote control codes, 1 to 8. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector first before changing that for the remote control. To switch the code for the projector, select from among 1 to 8 in the SYSTEM > Remote Control Code menu. To switch the code for the remote control, press ID set and the number button corresponding to the remote control code set in the projector OSD together for 5 seconds or more. The initial code is set to 1. When the code is switched to 8, the remote control can control every projector. 10