ViewSonic SC-T45 SC-T35 / SC-T45 ViewSonic Device Management (English) - Page 40
Client Detection and Management
View all ViewSonic SC-T45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using ViewSonic Device Manager Adding Clients into a Managed Group 3.3.3 Client Detection and Management Your client is not managed by any ViewSonic Device Manager by factory default. To manage your clients with ViewSonic Device Manager, you need to first detect unmanaged clients over your local network, and then add them into a managed group under your ViewSonic Device Manager. To look for a thin client over your local network, you can use different client detection options available under the Scan tab. The following table shows prerequisites and methods for detecting clients over your local network: Type Thin Client Model SC-T35 SC-T45 Prerequisites Method Section Page • clients are connected to the local network • clients are powered up Manual Scan 3.3.4 3.3.5 3.3.6 36 37 38 NOTE • If the computer where an ViewSonic Device Manager is installed connects to a local network, then the ViewSonic Device Manager is connected to the local network. • After adding clients into a managed group under your ViewSonic Device Manager, you can start remote management of clients. For detailed instructions on how to manage your clients remotely, please refer to section "3.4 Managing All Your Clients" on page 41. 35