ViewSonic VP2785-4K - 27 4K UHD AdobeRGB ColorPro IPS Monitor w/ USB C and HDR10 - Page 59

Page 59 highlights

Auto Pivot With the Auto Pivot function, the monitor can detect the image display and adjust the image's orientation on the screen automatically when pivoting the screen vertically or horizontally. The application installation file is in the software folder of the ViewSonic® CD. Or you can visit: http://color.viewsonic.com/support/software/ to check and download the latest version of the Auto Pivot application. NOTE: The Auto Pivot function uses DDC/CI to communicate with the monitor. Before applying the Auto Pivot function, please make sure the DDC/CI setting is set to On. To enable the DDC/CI settting: 1. Open the OSD Menu and select the Setup Menu menu. Then touch the 3 key to enter the menu. 2. Touch the 1 or 2 key to select DDC/CI. Then touch the 3 key to enter its sub- menu. 3. Touch the 1 or 2 key to select On. Then touch the 3 key to confirm. VP2785-4K Input Select Audio Adjust ViewMode Color Adjust Manual Image Setup Menu Adjust On Multi-Picture Off ECO Mode DisplayPort 1.2 HDMI 2.0 USB 3.1 DDC/CI Save As Backlight Sensor All Recall 720P60 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
59
Auto Pivot
With the Auto Pivot function, the monitor can detect the image display and adjust
the image’s orientation on the screen automatically when pivoting the screen
vertically or horizontally. The application installation file is in the software folder of
the ViewSonic
®
to check and download the latest version of the Auto Pivot application.
°NT±²
The Auto Pivot function uses DDC/CI to communicate with the monitor.
Before applying the Auto Pivot function, please make sure the DDC/CI
setting is set to
Nn
.
To enable the DDC/CI settting:
1.
Open the OSD Menu and select the
Setup Menu
menu. Then touch the
3
key to
enter the menu.
2.
Touch the
1
or
2
key to select
DDC/CI
. Then touch the
3
key to enter its sub-
menu.
3.
Touch the
1
or
2
key to select
Nn
. Then touch the
3
key to confirm.
On
Off
720P60
VP2785-4K
Setup Menu
Color Adjust
ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Multi-Picture
ECO Mode
DisplayPort 1.2
HDMI 2.0
USB 3.1
DDC/CI
Save As
Backlight Sensor
All Recall