ViewSonic VPW4255 User Guide - Page 21

OPERATING INSTRUCTIONS (continued) AUTO button MENU button ID button VOL RGB 1 RGB 2 MUTE VOL AV1 AV2 AV3 AV4 AUTO PinP SIZE RECALL MENU OK ID ID SET RETURN button SELECT/ADJUST buttons OK button ID SET button Automatic Adjustment of Screen Position and the Clock Adjustment of the screen to a position suitable for the PC signal and the clock adjustment can be performed automatically by pressing the AUTO button of the remote control. IMPORTANT Select the Automatic Adjustment of Screen Position for each input (RGB1 or RGB2) and for each signal. * Depending on the signal, satisfactory adjustment may not be possible. In such a case, adjust by referring to the Setup Menu item. Independent Operation of Multiple Monitors (ID No) Setting the ID No. of the remote control allows separate control of up to a maximum of seven monitors. Remote control ID No. 2 (initially ID no. 1) can be set by pressing the ID SET button for 2 sec. or more while holding down the ID button. The number will be incremented (2ʜ6ˠ7ˠ1ˠ2) when this button is pressed continuously. ID Number Monitor [ 1 ] R/C [ 1 ] The remote control ID no. can be checked by pressing the ID SET button while holding down the ID button. Monitor ID no. Remote control ID no. The ID remote control is operated by pressing the various buttons while holding down the ID button; Operation is possible only when the remote control and monitor ID nos. are the same. • The remote control can be operated normally by pressing the various remote control buttons without holding down the ID button. • Set the monitor using the ID No. of Function MENU.  Using the Menu Screen (On-screen display system) When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment and setting is possible by using the SELECT button, ADJUST button and OK button. • Refer to  -  concerning the adjustment items and the settings. Example: Selecting the Picture screen 1. Press the MENU button to display the Main Menu screen. MENU Picture Audio Timer Function Setup Language Select OK Set 2. Press the OK button to display the Picture Menu screen. (Use the and SELECT buttons to select other items.) Picture Contrast : + 31 OK Brightness : - 31 Color : 0 Tint : + 31 Picture Enhancement : Off Color Temperature : Normal Color Temp.Adjust Reset Reset Select Return Exit 3. Use the and SELECT buttons to select the item to be adjusted and then use the and ADJUST buttons to adjust (example: Contrast). Contrast Next / Prev + 31 Adjust Return • Press the RETURN button to return to the previous screen. • If there is no operation for a period of one minute, the Adjustment Menu screen will be closed automatically. ViewSonic VPW4255 19