ViewSonic VX2000 Service Manual - Page 35
Function Test and Alignment Procedure - settings
UPC - 766907539615
View all ViewSonic VX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
VX2000 Series Service Manual VX2000 series 6-5 Function Test and Alignment Procedure 6-5.1 All Mode Reset Input signal to VX2000, turn off the power of VX2000. Press and Power on buttons on the select knob simultaneously for 3-5 seconds, release Power on button first, then other buttons. The screen will show All Mode Reset. This action will allow you to erase all end-users settings and restore the factory defaults. 6-5.2 Auto Image Adjust Please select and enter Auto Image Adjust function on OSD Main Menu. The Auto Image Adjustfunction is aimed to offer a better screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each function manually. 6-5.3 Fine Tune Test Signal: 1600*1200@60Hz Test Pattern: Line Moire Pattern * Check and see if the image has noise and focus is well performed. * If not, readjust by the following steps: a.) Select and enter Manual Image Adjust function on OSD Main Menu. b.) Then, select and enter Fine Tune function to adjust the image to eliminate visual noise. 6-5.4 Boundary Test Signal: 1600*1200@60Hz Test Pattern: Horizontal & Vertical Line Thickness Pattern * Check and see if the image boundary is within the screen frame. * If not, readjust by the following steps: a.) Select and enter Manual Image Adjust function on OSD Main Menu. b.) Then, select and enter Horizontal/Vertical Position or Scaling\Fit All function to adjust the video Boundary to be full scanned and within screen frame. ViewSonic Corporation Confidential - Do Not Copy VX2000-1 6-5