Viking 15" Undercounter Wine Cellar Installation / Use and Care Instructions - Page 9

Using Your Electronic Control

Get Viking 15inch Undercounter Wine Cellar PDF manuals and user guides View all Viking 15" Undercounter Wine Cellar manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

USING YOUR ELECTRONIC CONTROL Figure 13 Control Function Guide Function Command Notes ON/OFF Press and release. Unit will immediately turn ON or OFF. Adjust Temperature Toggle Between oF / oC Press or and release. Hold and for 5 seconds. When the display is flashing, press or to adjust the set point temperature. Note: temperature displayed is the actual temperature inside unit. The display will change units. Leave Interior Light On Press and release to leave interior light on for 12 hours; press again to deactivate. After 12 hours, factory default is restored; light will turn on when door is open. Option Open Door Closed Door White White Adjust Light Color While holding , press and release to scroll through lighting options. Blue White Blue Blue Enable Sabbath Mode Disable Sabbath Mode Press and hold for 5 seconds and release. Press and release. Light will be set at full intensity when door is open, and 50% intensity when door is closed. The oF / oC symbol will flash briefly after 5 seconds. Interior light and display will go dark and remain so until user resets mode - unit continues to operate. Display and interior light return to normal operation. Door Alert Notification When the door is left open for more than 30 minutes: • A tone will sound for several seconds every minute • will appear in display • Close door to silence alert and reset NOTE Temperature displayed reflects actual temperature inside unit. If the temperature displayed is different than selected, the unit is progressing towards the selected temperature. Time to reach set point varies based upon ambient temperature, temperature of product loaded, door openings, etc. Viking recommends allowing the unit to reach set points before loading. High/Low Temp. Notifications When the compartment temperature exceeds the control setting for an extended amount of time: • "HH" will appear in display (High Temp) • "LL" will appear in display (Low Temp) Contact service dept. for further instructions. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Control Function Guide
Function
Command
Notes
ON/OFF
Press
and release.
Unit will immediately turn ON or OFF.
Adjust Temperature
Press
or
and release.
When the display is flashing, press
or
to adjust the set
point temperature. Note: temperature displayed is the actual
temperature inside unit.
Toggle Between
o
F /
o
C
Hold
and
for 5 seconds.
The display will change units.
Leave Interior Light On
Press
and release to leave interior light on for
12 hours; press again to deactivate.
After 12 hours, factory default is restored; light will turn on when
door is open.
Adjust Light Color
While holding
, press and release
to scroll
through lighting options.
Option
Open Door
Closed Door
White
White
Blue
Blue
White
Blue
Light will be set at full intensity when door is open, and 50%
intensity when door is closed.
Enable Sabbath Mode
Press
and hold for 5 seconds and release.
The
o
F /
o
C symbol will flash briefly after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate.
Disable Sabbath Mode
Press
and release.
Display and interior light return to normal operation.
Door Alert Notification
When the door is left open for more than 30 minutes:
•
A tone will sound for several seconds every minute
•
will appear in display
•
Close door to silence alert and reset
Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing
towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Viking recommends allowing the unit to reach set points before loading.
NOTE
9
Figure
1
3
USING YOUR ELECTRONIC CONTROL
High/Low Temp. Notifications
When the compartment temperature exceeds the control setting
for an extended amount of time:
•
“HH” will appear in display (High Temp)
•
“LL” will appear in display (Low Temp)
Contact service dept. for further instructions.