Viking DMOR200SS Installation Instructions - Page 5
Ventilation System - template
View all Viking DMOR200SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
8 Ventilation System (Preparing Oven for Installation) 8 Save fan cover bracket for ! future instructions. figure figure 4) HORIZONTAL EXHAUST: Put the wire back into the cavity. The Fan Cover Bracket and Exhaust Damper Assembly are mounted to the wall. Follow instructions on WALL TEMPLATE provided. (C) Vertical Exhaust: Outside Ventilation 9 figure 2) VERTICAL EXHAUST: Lift Hood Fan Unit carefully and slip wires out of cavity. • CAUTION: Do not pull or stretch hood fan wiring. " (A) Rotate (B) 90˚ figure 1) VERTICAL EXHAUST: Remove and save 2 screws from back edge and 3 screws from the top center of the Fan Cover Bracket. Remove Fan Cover Bracket by sliding it in the opposite direction of the arrow on the Fan Cover Bracket. 3) VERTICAL EXHAUST: Rotate the Hood Fan Unit 90˚ so that the fan blade openings are facing the top of the oven. See (A). Replace Hood Fan Unit into the oven. Be careful not to pinch the lead wire between the inner bracket and the Hood Fan Unit. Put the lead wire into Wire Box. See (B). Replace the Fan Cover Bracket by sliding it into the slits in the same direction as the arrow on the Fan Cover Bracket. Make sure the fan blades are visible through the top openings in the oven before proceeding. E5