Viking FWCI1150GR Use and Care Manual - Page 7

Interior Light Interior Light The unit is equipped with an interior light that is illuminated when the door is opened. The cabinet also comes standard with a display light function located on the control panel for displaying your products through a glass door. To use display lighting, press the Light button twice. On the first press, the light will turn off. On the second press, the light will turn back on and be in display lighting mode. Do not use the display light function with a solid door product. If the display light is left on for an extended period of time, it may increase the cabinet temperature, especially at the top and cause the refrigeration system to run longer. Light Bulb Replacement NOTE: Please contact your Viking Range parts distributor or dealer to order the LED light bulb. To replace light bulb, unscrew the bulb counterclockwise and replace with new bulb. Checking Product Temperature To accurately check the temperature of the product stored in a refrigerated compartment, insert an accurate thermometer into a plastic (non-breakable) bottle, partially filled with water. Tighten the bottle cap securely. Place the bottle in the desired area for 24 hours. Refrain from opening the unit during the testing period. After 24 hours, check the temperature of the water. Adjust the control settings if necessary and re-test. Your units are pre-set in order to achieve the recommended temperature range when installed in a 70°F ambient room temperature. Factors, which affect the internal temperatures of the refrigerated cabinet, include: • Temperature setting • Room temperature where installed • Number of times the door is opened and closed • Length of times the door is opened and closed • Length of times the door is left open • Style of door installed • Door gasket sealing and condition • Amount of time the internal light is illuminated • Installation in direct sun light or near a heat source 12 13