Viking Induction Cooktop Installation Instructions - Page 16

HGeandelrianleInformation READ AND FOLLOW ALL WARNING AND CAUTION INFORMATION WHEN INSTALLING THIS APPLIANCE. • Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors. • Disconnect the electrical supply prior to servicing or cleaning. Installation 1 • When removing the cooktop for service and/or cleaning, disconnect AC power supply. • Electrical requirements are listed in the product specifications under the "Electrical Requirements" section. 2 Ground Green Red Black Lower cooktop into cutout. 3 Connect the red and black leads from the unit conduit to the corresponding leads in the junction box. 4 Cooktop Countertop Cooktop Bracket Eye Bolt Screw Screw hold down brackets to the burner box using the #10 x 1/2" sheet metal screws. There are 6 bracket assemblies included. There must be a minimum of 2 brackets installed with the possibility of up to 6 in locations noted depending on installation 16 Screw eye bolt into brackets and tighten firmly against bottom of countertop. Note: Be careful not to crack or damage counter by overtightening.