Viking MVBI7360W Use and Care Manual - Page 17

Service Information, Troubleshooting

Page 17 highlights

Troubleshooting Alarm Code High Temperature Alarm Water Filter Alarm Open Door Alarm Long term power loss Alarm Bluezone® Bulb Replacement Indicator Alarm Digital Display Codes Code Explanation Alarm will sound and display will flash when temperature exceeds the high temperature allowed. Press alarm button. Sound will mute but display will continue to flash until normal maximum temperature is reached. When it is time to change the water filter, the water filter button will illuminate to blue. After filter has been changed, the illuminated button will go off. If any door or drawer is opened longer than 3 minutes, the open door alarm will sound. Closing the door will turn the open door alarm off. After a long term power loss, the temperature will display a power loss. Press any key to clear the power loss indicator When the Bluezone® bulb needs replacement, the thin blue Bluezone® indicator strip will appear along the bottom of the refrigerator display. After replacing the bulb, press and hold the Refrigerator Selector button for 3 seconds to clear display. Clean Condenser Coil Indicator The refrigerator temperature display will blink "CL" when it is time to clean the condenser coils. Service Information If service is required, call your authorized service agency. Have the following information readily available: • Model number • Serial number • Date purchased • Name of dealer from whom purchased Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range at (888) 845-4641 or write to: VIKING RANGE, LLC PREFERRED SERVICE 111 Front Street Greenwood, Mississippi 38930 USA Record the information indicated below. You will need it if service is ever required. The serial number and model numbers for your refrigerator are located on the upper wall, behind the lighting: Model No Serial No Date of Purchase Date Installed Dealer's Name Address _____ If service requires installation of parts, use only authorized parts to insure protection under the warranty. Keep this manual for future reference. Product Care 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

17
Product Care
Service Information
If service is required, call your authorized service agency.
Have the following information readily available:
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you
continue to have service problems, contact Viking Range at (888) 845-4641 or write to:
VIKING RANGE, LLC
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is ever required. The serial number and model numbers for your
refrigerator are located on the upper wall, behind the lighting:
Model No. _______________________________________________ Serial No. ______________________________________
Date of Purchase__________________________________________ Date Installed ___________________________________
Dealer’s Name ___________________________________________________________________________________________
Address ________________________________________________________________________________________________
_______________________________________________________________________________________________________
If service requires installation of parts, use only authorized parts to insure protection under the warranty.
Keep this manual for future reference.
Alarm Digital Display Codes
Alarm Code
Code Explanation
High Temperature
Alarm
Alarm will sound and display will flash when temperature exceeds the high temperature
allowed.
Press alarm button.
Sound will mute but display will continue to flash until normal
maximum temperature is reached.
Water Filter Alarm
When it is time to change the water filter, the water filter button will illuminate to blue.
After
filter has been changed, the illuminated button will go off
.
Open Door Alarm
If any door or drawer is opened longer than 3 minutes, the open door alarm will sound.
Closing the door will turn the open door alarm off
.
Long term power
loss Alarm
After a long term power loss, the temperature will display a power loss.
Press any key to clear
the power loss indicator
Bluezone® Bulb
Replacement
Indicator
When the Bluezone® bulb needs replacement, the thin blue Bluezone® indicator strip will
appear along the bottom of the refrigerator display.
After replacing the bulb, press and hold
the Refrigerator Selector button for 3 seconds to clear display.
Clean Condenser
Coil Indicator
The refrigerator temperature display will blink “CL” when it is time to clean the condenser coils.
Troubleshooting