Viking RVER3305BSS Use and Care Manual - Page 23

Replacing Oven Lights, Door Removal

Get Viking RVER3305BSS PDF manuals and user guides View all Viking RVER3305BSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Product Care Replacing Oven Lights WARNING ELECTRICAL SHOCK HAZARD Disconnect the electric power at the main fuse or circuit breaker before replacing bulb. CAUTION To avoid risk of personal injury, DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth. 1. Unsnap glass light cover using a screwdriver in the access groove. 2. Firmly grasp light bulb and access groove pull out. 3. Replace with halogen bulb using volt and wattage requirements listed on glass light cover. bulb 4. Replace the light cover by snapping glass cover onto metal box. 5. Reconnect power at the main fuse or circuit breaker. glass light cover 44 Door Removal WARNING TO PREVENT PERSONAL INJURY Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers. 2 1 Open door completely. Place pin in pin hole. 3 Remove hinge trim screws and hinge trim. 4 Close until pins stop door. Lift door up and out. 45 Product Care

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
45
44
Product Care
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or
circuit breaker before replacing bulb.
Replacing Oven Lights
CAUTION
To avoid risk of personal injury,
DO NOT
touch bulb with
bare hands. Clean off any signs of oil from the bulb and
handle with a soft cloth.
1.
Unsnap glass light cover
using a screwdriver in the
access groove.
2.
Firmly grasp light bulb and
pull out.
3.
Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4.
Replace the light cover by
snapping glass cover onto
metal box.
5.
Reconnect power at the main
fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
Product Care
Door Removal
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
Lift door up and out.
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the
hinges. Failure to do so can
result in personal injury to
hands and/or fingers.