Viking RVEWD Installation Instructions
Viking RVEWD Manual
 |
View all Viking RVEWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Viking RVEWD manual content summary:
- Viking RVEWD | Installation Instructions - Page 1
Installation 3 Series Built-In Electric Warming Drawer RVEWD330 - Viking RVEWD | Installation Instructions - Page 2
Table of Contents Warnings & Important Safety Instructions 3 Dimensions 4 Specifications 5 Cutout Dimensions 6 Electrical Requirements 7 General Information 8 Installation 9 Final Preparation 11 Performance Checklist 11 Service & Registration 12 2 - Viking RVEWD | Installation Instructions - Page 3
IMPORTANT- Read and Follow! • Before beginning, please read these instructions completely and carefully. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. ALWAYS read and obey all safety messages. This is - Viking RVEWD | Installation Instructions - Page 4
Dimensions (251.40"cm) (2794-.91/c2m") 2((2567399-7-..171//1cc4mm6"")) 8(2-321.4/3cm2") 22-15/16" (58.3 cm) 1-5/8" (4.1 cm) 27-7/16" (69.7 cm) 23-7/16" (59.5 cm) 4 - Viking RVEWD | Installation Instructions - Page 5
Dimensions Rear View 27-7/8" (70.8 cm) 2" (5.1 cm) 120V Electrical Opening (When facing cabinet, opening is located on right side.) 2" (5.1 cm) 8-31/32" (22.8 cm) Specifications Description Overall width Overall height (from bottom) Overall depth (from rear) To end of handle With drawer fully - Viking RVEWD | Installation Instructions - Page 6
Cutout Dimensions Cutout width (A) Cutout depth (B) Cutout height (C) RVEWD 28-1/4" (71.8 cm) 23-1/2" (59.7 cm) 9-1/4" (23.5 cm) C A B 6 - Viking RVEWD | Installation Instructions - Page 7
wtih ground circuit. Maximum amp usage. Max. amp usage RVEWD 450 watts 3.8 amps Electrical Connection Note: Use copper conductors ONLY! Grounding Instructions This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the - Viking RVEWD | Installation Instructions - Page 8
accessible to the operator. • Ground unit per applicable electrical codes. • Any installation not matching the specifications discussed in these instructions will void the manufacturer's warranty. READ AND FOLLOW ALL WARNING AND CAUTION INFORMATION WHEN INSTALLING THIS APPLIANCE. Moving, Handling - Viking RVEWD | Installation Instructions - Page 9
hand latches (located at the front of the rails). Pull up on both the right and left latches and pull out drawer pan support. Electrical opening (from rear) 3 2" 4 (5.1 cm) 2" (5.1 cm) 2 1 1 Feed supply cord up through hole in rear of warming drawer. 5 Remove strain relief bracket and - Viking RVEWD | Installation Instructions - Page 10
Installation (cont.) 7 8 Slide cavity assembly into the cabinet opening. 9 x4 Secure the warming drawer using four #8 mounting screws (four screws provided). Replace drawer assembly. Final Preparation • All stainless steel body parts should be wiped with hot, soapy water and with a liquid - Viking RVEWD | Installation Instructions - Page 11
located on the left, rear side. Record the following information indicated below. You will need it if service is ever required. Model number Serial number Date of purchase Date installed Dealer's name Address These installation instructions should remain with the unit for future reference. 11 - Viking RVEWD | Installation Instructions - Page 12
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit our website at vikingrange.com F21201E EN (070120)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
3 Series
Built-In Electric Warming Drawer
RVEWD330
Installation