Viking RVEWD Installation Instructions - Page 10
Final Preparation
 |
View all Viking RVEWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation (cont.) 7 8 Slide cavity assembly into the cabinet opening. 9 x4 Secure the warming drawer using four #8 mounting screws (four screws provided). Replace drawer assembly. Final Preparation • All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this material. If buildup occurs, DO NOT use steel wool, abrasive cloths, cleansers, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wool or nylon scraper. DO NOT use a metal knife, spatula, or any other material tool to scrape stainless steel! Scratches are almost impossible to remove. 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
10
7
Slide cavity assembly into the cabinet opening.
8
x4
9
Secure the warming drawer using four
#8 mounting screws (four screws provided).
Replace drawer assembly.
Installation
(cont.)
Final Preparation
•
All stainless steel body parts should be wiped
with hot, soapy water and with a liquid
cleaner designed for this material.
If buildup occurs,
DO NOT
use steel wool,
abrasive cloths, cleansers, or powders!
If it is necessary to scrape stainless steel
to remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use a
wool or nylon scraper.
DO NOT
use a metal
knife, spatula, or any other material tool to
scrape stainless steel! Scratches are almost
impossible to remove.