Viking VCBB363RSS Grille Kit Instructions - Page 21
Designer Grille
View all Viking VCBB363RSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Grille Assembly Bracket Placement - Designer Models For 66" grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. See illustration below. 66" Designer Grille (back view) Use this bracket if 36" W. product is on right side (facing unit), otherwise remove. TOP Use this bracket if 30" W. product is on left side (facing unit), otherwise remove. Use this bracket if 30" W. product is on right side (facing unit), otherwise remove. Use this bracket if 36" W. product is on left side (facing unit), otherwise remove. *NOTE: Depending on unit configuration, two brackets should be removed and discarded. The 72" W. and 60" W. grille assemblies have all four (4) brackets mounted in the proper location. Grille Assembly Install - Designer Models • Remove center grille blade by lifting up and pulling forward. • Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Grille Removal Section). 40 41