Viking VCFB364LSS Installation Instructions - Page 30

Kickplate Installation, Door Stop Adjustment, Final Installation

Get Viking VCFB364LSS PDF manuals and user guides View all Viking VCFB364LSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

14 15 Turn on water supply and check for leaks. 16 Lift unit off rollers to desired height and level unit using a 5/16" head wrench. Note: DO NOT use an electric device. Overtightening can cause damage. 17 Screw Wall 2x4 Refrigerator Attach positive secure self-tapping bolts to 2 x 4 using a 22" extension. Kickplate Installation 18 1 Verify that drain pan is installed and aligned. 19 2 2 3 Align holes on both ends of louvered panels and insert screws. Using a Phillips screwdriver, attach the kickplate to the unit and adjust to desired height. 58 Door Stop Adjustment 20 21 1 1 90˚ 3 110˚ 120˚ 2 2 Open refrigerator door so door stop and shoulder screw are accessible. Note: Shoulder screw should be in 110˚ door opening position. Final Installation Remove shoulder screw and place in 90˚ or 120˚ position. 22 23 Replace top air grille. 24a Using an 8"magnetic nut driver, replace the two 1/4" screws. 24b designer (Professional) Replace the center grille louver. (Designer) Replace the center grille louver. 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
59
58
Turn on water supply and check for leaks.
Lift unit off rollers to desired height and level unit using
a 5/16” head wrench.
Note:
DO NOT use an electric device. Overtightening
can cause damage.
Attach positive secure self-tapping bolts to 2 x 4
using a 22” extension.
Verify that drain pan is installed and aligned.
Align holes on both ends of louvered panels and insert
screws.
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.
14
15
Wall
2x4
Refrigerator
Screw
16
17
1
2
18
2
3
19
Kickplate Installation
3
1
2
20
1
2
21
110˚
120˚
90˚
Open refrigerator door so door stop and shoulder
screw are accessible.
Note:
Shoulder screw should be in 110˚ door opening position.
Remove shoulder screw and place in 90˚ or
120˚ position.
Door Stop Adjustment
Replace top air grille.
Using an 8”magnetic nut driver, replace
the two 1/4” screws.
(Professional) Replace the center grille louver.
(Designer) Replace the center grille louver.
22
23
24a
24b
designer
Final Installation