Viking VCFF036SS Installation Instructions - Page 10
Freezer Drawer Removal
View all Viking VCFF036SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 4 Unscrew 5/16" hex head screws from right top hinge and remove hinge. Retain all screws for later use. 5 Lift right side refrigerator door from center hinge pin. Remove door closure from center hinge pin on the right side. Retain for later use. 6 Disconnect wire harness on top of left side refrigerator door top hinge. Release two-pin connector by pressing junction point with a flat blade screwdriver or fingernail. Green ground wire remains attached to the hinge. 7 Unscrew 5/16" hex head screws from left top hinge. Retain all screws for later use. 8 Lift left side refrigerator door, along with top hinge, from center hinge pin. Remove screws to remove right and left hinges. Retain all screws for later use. 18 Freezer Drawer Removal (Bottom-Mount) 1 2 Pull drawer open to full extension. 3 Loosen the four screws attaching the drawer glides to the drawer front on both sides. NOTE: Loosen screws three to four turns. Keep the screws in the drawer front. 4 Lift drawer front upward and off the screws. Push both rails back in. 19