Viking VCFF036SS Additional Installation Instructions - Page 2

Installation

Page 2 highlights

Installation Right Panel Right Trim Front Grille Adhesive 1 Tape Screws A B C Left Panel Left Trim Spacer Set Screws L Bracket Required Components Bottom Mount Model Only 2 Remove and discard screw and hinge cover. Remove screw on hinge plate. (Repeat if two hinges are used.) Bottom Mount Model Only 3 Remove and discard plug button from hole on non-hinge side. Bottom Mount Model Only 4 Remove three screws from mullion area opposite the center hinge. 5 Install set screws from bag into holes from previous step. 2 Remove edge of corner cover.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

2
Required Components
Remove and discard screw and hinge cover. Remove
screw on hinge plate.
(Repeat if two hinges are used.)
Remove and discard plug button from hole on
non-hinge side.
Remove three screws from mullion area opposite the
center hinge.
Install set screws from bag into holes from
previous step.
Remove edge of corner cover.
Left Panel
Left Trim
Right Panel
Right Trim
Front Grille
Adhesive
Tape
Set
Screws
Screws
Spacer
L Bracket
A
C
B
1
Bottom Mount
Model Only
2
Bottom Mount
Model Only
3
Bottom Mount
Model Only
4
5
Installation