Viking VCFF036SS Additional Installation Instructions - Page 4

12 Bottom Mount Model only 13 French Door and Side-by-Side Dispenser Models only Position spacers included in the kit on the non-hinge side over the exposed hole from step one. 14 French Door and Side-by-Side Dispenser Models only Feed wire harness and ground wire through the bottom of the endcap and out through the hole in the rear of the grille. 15 French Door and Side-by-Side Dispenser Models only 2 1 Connect wire harness to wire harness in cabinet. Connect ground screw. Secure wire harness to top of the cabinet with a piece of tape. 16 C Remove adhesive backing. Firmly press the grille assembly down so the adhesive adheres to the cabinet. Align grille assembly to front door and position grille on top of unit. 17 72" Secure the grille brackets to the holes in the hinge plate. Raise the unit up until the measurement from the floor to the top of the grille assembly is 72 inches or 6 feet. 4