Viking VDB450SS Use and Care Manual - Page 7
Features: Cycles - dishwasher model
View all Viking VDB450SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Features: Cycles Features: Cycles Product Controls Product Controls 450E 325E Wash Cycles POTS/PANS Heavily soiled pots, pans and casserole dishes. Intense pressure, added wash time and high temperatures. NORMAL WASH Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Varying pressure levels. Energy usage label is based on this cycle. ECONO WASH Normally soiled plates, glasses, bowls, and lightly soiled pots and pans. Lowers last wash temperature and increases cycle time for optimum performance. LIGHT/CHINA Lightly soiled dishes or fine china and crystal. Low temperature, shorter wash and rinse. Varying pressure levels to ensure wash performance and protect delicate dishes. RINSE/HOLD All dishware. Short, non-heated rinse with high pressure. Options TOP WASH (450E model only) Washes dishes on top rack only. Available on Normal Cycle. 12 HI TEMP WASH Increases time, temperatures and may add extra water to improve cleaning performance. Available with Pots/Pans and Normal cycles. NOTE: When used with Pots/Pans cycle, periods of soaking will occur to aid in the removal of baked on soils. ECONO DRY (450E model only) Selects a "no heat" dry. Available on Normal, Econo Wash and Light China Cycles. DELAY START Lets you delay running the dishwasher. To set "Delay Start", select the desired wash cycle and option(s). Press the "Delay Start" key once and the number "2" will light, indicating a two hour delay. If you desire a longer delay, continue pressing the "Delay Start" key to the desired delay time. The corresponding number on the key will light. Once you have set the desired delay time, press the "START" button and close the door. "Delay Start" is not available with the Rinse/Hold cycle. Available delay times vary by models. Audible Sound Signal A single beep will occur when you select cycles, options and press the "START" button. The end-of-cycle signal consists of 2 long beeps. If the "START" button is not pressed or if the door is not closed within 4 seconds of pressing the "START" button, 3 short beeps will occur. For all other error messages and to deselect the audible sound signal, see the Troubleshooting/Fault Codes section. NOTE: Option, Cycle and Start keys will only illuminate after they are selected. 13