Viking VDOT Installation Instructions - Page 12
Installation
View all Viking VDOT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation • BE SURE that support for this appliance is perpendicular to the front facing of the wall or cabinet before you perform the installation. • It is recommended to use standard 2 x 4 support posts with a minimum of 3/4" (1.9 cm) solid base to support the oven. Support posts should be level with the floor line and well-secured to the base of the cabinet. Base cabinet support must be able to support the oven's weight - 410 lbs. (186 kg). • Use of a hydraulic lift is recommended for the installation of double oven units. • All openings in the wall behind the appliance or in the floor under the appliance should be sealed. • Keep appliance area clear and free from combustible materials, gasoline and other flammable vapors. • WARNING: DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. SUCH USE MAY RESULT IN FIRE, ELECTRICAL SHOCK OR OTHER PERSONAL INJURY. Attach the skid plate before installing the two slide rails. If possible, the rails should be placed on top of any studs that might be located under the cabinet interior floor. 1. Remove adhesive backing from skid plate. Center across the inside front of the cabinet opening with flange and screw locations on front outer edge. Screw into place with enclosed screws. 2. Remove adhesive backing from one of the slide rails. 3. Place the slide rail left of the center line on the cabinet floor (adhesive side down) flush with the outer edges of the skid plate. Press the slide rail down firmly against the cabinet floor. 4. Repeat step 3 for the second slide rail. Cabinet Floor Center Line Cabinet Skid Plate and Side Rails Two 21" (53.3 cm) slide rails and one 28" (71.1 cm) skid plate have been included to help install the oven into your cabinet more easily by providing a flat smooth surface on which to slide the oven into place. The skid plate and slide rails are flat metal strips with adhesive tape strips on one side. adhesive strips Skid plate 1 Remove the outer corrugated cover and all inner packing. Remove wooden brace on front of pallet. 12