Viking VDWU324SS Installation Instructions - Page 5
Tools Which May Be Needed, Materials Which May Be Needed
View all Viking VDWU324SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. TOOLS WHICH MAY BE NEEDED Flat head Screwdriver 3. MATERIALS WHICH MAY BE NEEDED (Additional materials may be required to comply with local codes) Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. Elbow with 3/4" N.P.T. female thread for dishwasher side, and sized to fit your water supply line (copper tubing/compression fitting, or braided hose) on the other side. Dishwasher connection is 3/4" male. UL listed conduit connector or strain relief. Teflon tape or other pipe thread compound to seal plumbing connections. Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression fitting, or braided hose). Silicone Glue Dishwasher Discharge Hose Adaptor 3 USA
3
USA
2. TOOLS WHICH MAY BE NEEDED
Flat head Screwdriver
3. MATERIALS WHICH MAY BE NEEDED
(Additional materials may be required to comply with local codes)
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided
dishwasher supply line.
Elbow with 3/4” N.P.T. female thread for dishwasher side, and sized to
fi
t
your water supply line (copper tubing/compression
fi
tting, or braided hose)
on the other side. Dishwasher connection is 3/4" male.
UL listed conduit connector or strain relief.
Te
fl
on tape or other pipe thread compound to seal plumbing connections.
Shut-off valve and
fi
ttings appropriate for hot water supply line (copper
tubing/compression
fi
tting, or braided hose).
Silicone
Glue
Dishwasher Discharge Hose Adaptor