Viking VDWU324SS Use and Care Manual - Page 29

Technical Features

Get Viking VDWU324SS PDF manuals and user guides View all Viking VDWU324SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid. • Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately and check the water hardness setting. If your supply water is soft (>> Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into the machine. Remove heavy soil on the dishes under tap water, with a sponge or towel. • Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the help of a tissue paper/towel. • Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding rinse aid. Kitchen utensils are broken. • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. • Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity. Water remains in the dishwasher at the end of the program. • Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section "Cleaning and Care". • Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove the discharge hose, clear the blockage and insert is as illustrated in the user manual. C If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself. 12. TECHNICAL FEATURES Load capacity Permissible water pressure 4.35 - 145 psi (0.3 - 10 bars) Electrical connection 120 V (volts), 12 A (amps), 60Hz (hertz) Total power 1400 W (watts) Heater power 1100 W (watts) C NOTICE: Because we continually strive to improve our products, we may change our specifications and design without prior notice. This device corresponds to the following directives: UL 749 Household Dishwasher directive. 29 USA

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
29
USA
A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish
/ rainbow appearance occurs when the glass is pointed to light.
•
Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
•
Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the supply water appropriately
and check the water hardness setting. If your supply water is soft (<15 gpg), do not use salt. Choose programs that
wash in higher temperatures (140-149 degress Fahrenheit). You can also use glass protective detergents that are
commercially available.
Foam forms in the machine.
•
Dishes are washed with hand-wash detergent by hand but not rinsed before placing them into the machine. >>>
Hand-wash detergents do not contain antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Remove heavy soil on the dishes under tap water, with a sponge or towel.
•
Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse aid is not spilled in the
machine when you are filling it. Clean any spilled rinse ait with the help of a tissue paper/towel.
•
Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid reservoir is closed after adding
rinse aid.
Kitchen utensils are broken.
•
Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual.
•
Baskets are overloaded.
>>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the program.
•
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly as illustrated in section
“Cleaning and Care”.
•
Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove the discharge hose, clear
the blockage and insert is as illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or
the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
12. TECHNICAL FEATURES
Load capacity
Permissible water
pressure
4.35 - 145 psi (0.3 - 10 bars)
Electrical connection
120 V (volts), 12 A (amps), 60Hz (hertz)
Total power
1400 W (watts)
Heater power
1100 W (watts)
C
NOTICE:
Because we continually strive to improve our products, we may change our specifications and
design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.