Viking VDWU524WSSS Installation Instructions - Page 16
Adjusting The Movable Toe Kick, 2 Readjusting Foot, Levels
View all Viking VDWU524WSSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
7.2 READJUSTING FOOT LEVELS Now that the dishwasher is in the cabinet you must readjust the feet to bring the dishwasher up to the required height and attach it underneath the countertop. 1. Readjust the front foot levels with adjusting wrench to balance the dishwasher and raise it up under the countertop, make sure the unit is level. 2. Readjust the rear foot levels with a screwdriver to balance the dishwasher and raise it to the required height using the brackets supplied. 3. Attach the dishwasher underneath the countertop with the four screws supplied (Ø 1/8" x 1/8" - Ø 3.5mm x 14mm). Make sure you do not go through the top of the countertop or damage granite. 7.3 ADJUSTING THE MOVABLE TOE KICK Now that you have successfully installed the dishwasher, you need to attach the toe kick to the dishwasher. The two piece toe kick can be adjusted to the height and depth needed for your kitchen. Be sure to use the slotted toe kick in the front and the other behind it. They slide into each other. Place parts K and L to the channel shown in Figure A for both sides as shown in Figure B. Then fix them in the direction shown with the arrow in Figure C and Figure B. 14 USA