Viking VDWU524WSSS Installation Instructions - Page 9
Adjusting Height
View all Viking VDWU524WSSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Tighten the plugs on both sides of your machine (v) Place the two mounting brackets into the top corners of the dishwasher. Fix the mounting brackets (A) to the top corners of the dishwasher, with the screws supplied. Bend sides of mounting brackets (B) in order to fix from sides (if necessary). 6.3 ADJUSTING HEIGHT If the height of the enclosure is 33⅞" to 35⅞" (861 mm - 911mm) adjust supports as shown in the figure. Supplied (4) Adjust the front foot level with the adjusting wrench to balance and raise the dishwasher to the enclosure height. Adjust the rear foot level with a screwdriver to balance and raise the dishwasher to the enclosure height. 7 USA
7
USA
Tighten the plugs on both sides
of your machine (v)
Place the two mounting brackets into the top
corners of the dishwasher.
Fix the mounting brackets (
A
) to the top corners of
the dishwasher, with the screws supplied.
Bend sides of mounting brackets (
B
) in order to
fi
x
from sides (if necessary).
6.3 ADJUSTING HEIGHT
If the height of the enclosure is 33
⅞
” to 35
⅞
” (861
mm - 911mm) adjust supports as shown in the
fi
gure.
Supplied (
4
)
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.