Viking VMOD Installation Instructions - Page 6

Drawer Installation Model and Serial Number Location 5 A PARTS SUPPLIED B Mounting Screws 4 Screws 1. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet. 2. Carefully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall. 3. Slide the drawer all the way until the mounting flange is flush with the face of the cabinet. See figure 5A. 4. Open the drawer. Using the 4 holes on the drawer as a template, pre drill the cabinet using a 1/16" bit. See figure 5A. 5. Secure the drawer with the 4 screws supplied. See figure 5B. The name plate includes model number and serial number. Open the DrawerMicro oven fully. The label is slightly beyond the back wall of the microwave cavity facing up from the flat surface. Care, Cleaning and Maintenance Refer to the Use and Care Manual for cleaning instructions. Before You Call for Service Read the BEFORE YOU CALL and operating instruction sections in your Use and Care Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this range. Refer to the warranty in your Use and Care Manual for toll-free service number and address. Please call or write if you have inquiries about your microwave product and/ or need to order parts. Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit our web site at vikingrange.com in the US or brigade.ca in Canada E6