Viking VMOD Flush-mount kit for 24" VMOD MicroDrawer - PMD240FTKSS - Inst - Page 3

Move oven location downward for extended countertops for better viewing angle. 16 7/8 " (428.62 mm) flush opening height Anti-Tip block 3/4" (19.05 mm) shelf Front face of cabinet 13/4" (44.45 mm) front face of shelf Figure 2C Side view 2. Install deflector Shelf detail showing the deflector vent during installation. Position deflector vent and mark holes. Pre drill using a1/16" (1.57 mm)bit before mounting. Shelf detail showing the deflector vent installed. Figure 3A Figure 3B 3. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet. 4. Carefully guide the drawer into the prepared opening. Avoid contact with the sides of the cutout opening and also pinching the cord between the oven and the wall. 5. Slide the drawer all the way back until the mounting flanges touch the cleats mounted in the cabinet opening. 6. Open the drawer. Using the 4 holes on the drawer as a template, pre drill the cabinet using a 1/16" (1.57 mm) bit. See Figure 4. 7. Secure the drawer with the 4 screws supplied. Figure 4 Mounting flange 3